M611 Label Printer User Manual 15
Setup
Loading Supplies
Label compatibility notes:
• M6-, M6C-, BM6- and BM6C- label supplies are compatible with the M611 Label Printer.
• Some BM71 label supplies may be compatible with the M611 Label Printer, check
www.BradyID.com for specifics.
To load labels:
1. Lift the lid on the printer.
2. Remove the existing label roll.
3. Remove the protective tape covering the leading end of the labels on the new label roll.
a. If the label spool is
not empty, gently
rewind the spool with
your finger to back
the unused label
supply out from
under the print head.
b. Grasp the label roll
smart cell guide and
gently pull up out of
the label well.
To Next Page
Loading...
