Brocade Communications Systems FastIron X Series Hardware Installation Guide

100 Brocade FastIron X Series Chassis Hardware Installation Guide
53-1001723-02
Displaying management module CPU usage
4
FastIron# disable switch-fabric 1
Syntax: disable switch-fabric 1 | 2
where switch-fabric 1 is the left-most module in the FSX 800 chassis and the top-most module in
the FSX 1600 chassis, and switch-fabric 2 is the right-most module in the FSX 800 chassis and the
bottom-most module in the FSX 1600 chassis.
To reenable power to the switch fabric module, enter the following command at the Privileged EXEC
level of the CLI.
FastIron# enable switch-fabric 1
Syntax: enable switch-fabric 1 | 2
where switch-fabric 1 is the left-most module in the FSX 800 chassis and the top-most module in
the FSX 1600 chassis, and switch-fabric 2 is the right-most module in the FSX 800 chassis and the
bottom-most module in the FSX 1600 chassis.
Displaying management module CPU usage
You can display the amount of the management module’s CPU in use. To do so, enter the following
command at any level of the CLI.
Syntax: show cpu
FastIron# show cpu
31 percent busy, from 3248 sec ago
1 sec avg: 31 percent busy
5 sec avg: 31 percent busy
60 sec avg: 31 percent busy
300 sec avg: 31 percent busy

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English