Brocade Communications Systems FastIron X Series Hardware Installation Guide

174 Brocade FastIron X Series Chassis Hardware Installation Guide
53-1001723-02
Power supply specifications
7
Regulatory compliance
The power supplies comply with the conducted and radiated test, immunity, and safety standards
as listed in Table 37. EMC standards are within a 6 dB minimum margin.
Safety warnings
The power supplies are marked with an electrical hazard label and with the safety warnings shown
in Table 38.
The SX-ACPWR-SYS with part number 32014-xxx and SX-ACPWR-POE with part number 32016-xxx,
have additional safety warning labels as shown in Table 39
TABLE 37 Power supply regulatory compliance
Description Certifications
Electromagnetic Emissions CISPR 22 Class A
FCC Class A
VCCI Class A
EN55022 Class A
Harmonic Current Emissions (Class A) - EN61000-3-2, with Amendment
14 (1999)
Voltage Fluctuations and Flicker - EN61000-3-3
ICES-003 Class A
AS/NZS 3548 Class A
Immunity EN 55024
EN 61000-4-5. The power supply is tested to level 2 (differential mode)
and level 3 (common mode)
Safety UL 60950-1/CSA C22.2 No 60950-1-03 – Safety of Information
Technology Equipment
EN 60950-1 – Safety of Information Technology Equipment
IEC 60950-1 – Safety of Information Technology Equipment
TABLE 38 Safety warning labels on power supplies
CAUTION: No operator serviceable parts inside. Refer servicing to qualified personnel.
ATTENZIONE Non aprire. Rivolgersi a personale qualificado.
CUIDADO Partes adentro no reparables por el operador. Refiera reparo a personal
autorizado.
ATTENTION Entretien et répartions internes ne sont autorisés qu’au personnel
technique qualifié.
GEFAHR Zugang zur Bedienung nicht erförderlich. Wartung nur durch qualifiziertes
Personal.
TABLE 39 Safety warning labels on power supplies
!DANGER!: Don’t touch impeller
Use caution when closing latch

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English