Brocade Communications Systems FastIron X Series Hardware Installation Guide

Brocade FastIron X Series Chassis Hardware Installation Guide 81
53-1001723-02
Testing network connectivity
3
Testing network connectivity
After you install the network cables, you can test network connectivity to other devices by pinging
those devices. You also can observe the LEDs related to network connection and perform trace
routes.
For more information about ping and traceroute commands, refer to the FastIron Configuration
Guide
Observing LEDs
After you install the network cables, you can observe certain LEDs to determine if the network
connections are functioning properly. Table 19 outlines the LEDs related to the network
connections, the desired state of each LED, possible abnormal states of each LED, and what to do
if an LED indicates an abnormal state.
NOTE
Some modules use combined link and activity LEDs.

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English