6.16 Set alarm mode
When entering the alarm settings screen the alarm mode
is selected. Press to enter the edit mode. Select an
alarm mode using and . Press to exit the
edit mode without changes. Press to confirm your
selection and exit the edit mode.
6.17 Set alarm mode parameters
To change one of the alarm mode parameters use the
and button to select the parameter you want to
change and press to enter the edit mode.
In the edit mode, use and to change each
character. Press to select the next character.
Press to exit the edit mode without changes.
When the final character is changed, press to confirm
and to exit the edit mode.
To Next Page
Loading...
