A
CAUTION
Installation
<9
• Machine installation should only be carried out
•
•
All
cords
should
be secured at least 25
mm
by a qualified technician.
away from any moving parts. Furthermore, do
<9
not excessively bend the cords or secure them
•
• Contact
your
Brother dealer
or
a qualified elec-
too
firmly
with
staples, otherwise there is the
trician
for
any electrical work that may need to
danger that fire
or
electric shocks could occur.
be done.
•
• Install the belt covers to the machine head and
•
• The sewing machine weighs more than
33
kg .
motor.
The installation should
be
carried
out
by
two
or
more people.
•
•
If
using a
work
table
which
has casters, the
casters should
be
secured in such a way
so
that
<9
•
Do
not connect the power cord until installation
they cannot move.
is complete, otherwise the machine may oper-
ate
if
the treadle is pressed by mistake, which
<9
•
Be
sure to wear protective goggles and gloves
could result in injury.
when
handling the lubricating oil, so that no oil
gets into your eyes
or
onto your skin, otherwise
•
•
Be
sure
to
connect the ground. If the ground
inflammation can result.
connection is not secure, you run a high risk
of
Furthermore, do not drink the oil under any cir-
receiving a serious electric shock, and problems
cumstances,
as
it
can cause
vomiting
and di-
with correct operation may also occur.
arrhoea.
Keep the oil
out
of
the reach
of
children.
Sewing
<9
• This sewing machine should only
be
used
by
•
•
If
using a
work
table
which
has casters, the
operators
who
have received
the
necessary
casters should
be
secured in such a way so that
training in safe
use
beforehand.
they cannot move.
<9
• The sewing machine should
not
be used
for
&.
•
Do
not touch any
of
the moving parts
or
press
any applications other than sewing.
any objects against the machine while sewing,
as
this may result in personal injury
or
damage
&
•
Turn
off
the
power
switch
at
the
following
to the machine.
times, otherwise the machine may operate
if
the treadle is pressed by mistake, which could
&
• For machines with automatic presser lifter, do
result in injury.
not touch the solenoid section, otherwise burns
• When threading the needle
may result.
• When replacing the needle and bobbin
• When not using the machine and when leav-
•
•
If
an
error occurs in machine,
or
if
abnormal
ing the machine unattended
noises
or
smells are noticed, immediately turn
* When using a clutch motor, the
motor
will
off
the power switch. Then contact
your
near-
keep
turning
even
after
the
power
is
switched
off
as
a result
of
the motor's iner-
est Brother dealer
or
a qualified technician.
tia.
Wait
until the
motor
stops
fully
before
•
•
If
the
machine develops a problem, contact
starting work.
your nearest Brother dealer
or
a qualified tech-
&
• Attach all safety devices before using the sew-
nician.
ing machine.
If
the machine is used
without
these devices attached, injury may result.
Cleaning
&
• Turn
off
the power switch before carrying
out
<9
•
Be
sure to wear protective goggles and gloves
cleaning, otherwise the machine may operate
when
handling the lubricating oil, so that no oil
if
the treadle is pressed by mistake, which could gets into your eyes
or
onto your skin, otherwise
result in injury. inflammation can result.
* When using a clutch motor, the
motor
will
Furthermore,
do
not
drink
the oil
under
any
keep
turning
even
after
the
power
is
circumstances,
as
it
can cause
vomiting
and
switched
off
as
a result
of
the motor's iner- diarrhoea.
tia. Wait until the
motor
stops
fully
before Keep the oil
out
of
the reach
of
children.
starting work.
082-8720 series (English)
ii
To Next Page
Loading...
Need help?
General
