Brother DCP-L5600DN Service Manual

vi
Confidential
8. IF YOU REPLACE THE TT / LT ................................................................................................ 4-15
8.1 Installing Firmware (Main Firmware) ................................................................................ 4-16
8.1.1 Checking firmware version ................................................................................... 4-16
8.1.2 Installing firmware ................................................................................................ 4-17
8.2 Adjusting Left-end and Upper-end Print Position (TT only) .............................................. 4-18
CHAPTER 5 SERVICE FUNCTIONS
1. MAINTENANCE MODE ............................................................................................................... 5-1
1.1 How to Enter Maintenance Mode ....................................................................................... 5-1
1.1.1 Method of entering maintenance mode for service personnel ............................... 5-1
1.1.2 Method of entering end-user accessible maintenance mode ................................. 5-2
1.2 List of Maintenance Mode Functions .................................................................................. 5-3
1.3 Details of Maintenance Mode Functions ............................................................................. 5-5
1.3.1 Initialize EEPROM parameters (function code: 01, 91) .......................................... 5-5
1.3.2 ADF performance test (function code: 08) ............................................................. 5-6
1.3.3 Print quality test pattern (function code: 09) ........................................................... 5-7
1.3.4 Set worker switches (WSW) and
print worker switch setting data (function code: 10, 11) ......................................... 5-8
1.3.5 Check LCD operation (function code: 12) ............................................................ 5-11
1.3.6 Check control panel key operation (function code: 13) ........................................ 5-12
1.3.7 Save NetConfig data (function code: 18) ............................................................. 5-13
1.3.8 Display software version (function code: 25) ........................................................ 5-14
1.3.9 Change OnePushDemo function setting (function code: 28) ............................... 5-15
1.3.10 Check sensor operation (function code: 32) ......................................................... 5-16
1.3.11 Display LAN connection status (function code: 33) .............................................. 5-20
1.3.12 Set PC print functions (function code: 43) ............................................................ 5-21
1.3.13 Change USB No. return value / Adjust left-end print position /
Adjust upper-end print position / Set HEXDUMP Mode (function code: 45) ........ 5-24
1.3.14 Adjust printable range for each speed level
(Full speed / Half speed for thick paper / Quiet Mode) (function code: 46) .......... 5-27
1.3.15 Set country / language (function code: 52) ........................................................... 5-29
1.3.16 Transfer received fax data /
log information (function code: 53) (fax models only) ........................................... 5-30
1.3.17 Fine-tune scanning position (function code: 54) ................................................... 5-32
1.3.18 Acquire white level data and set CIS scan area (function code: 55) .................... 5-33
1.3.19 Adjust touch panel (function code: 61) ................................................................. 5-34
1.3.20 Continuous print test (function code: 67) .............................................................. 5-35
1.3.21 Print frame pattern (single-side printing) (function code: 69) ............................... 5-39
1.3.22 Print frame pattern (duplex printing) (function code: 70) ...................................... 5-40
1.3.23 Print test pattern (function code: 71) .................................................................... 5-41
1.3.24 Configure for country/region and model (function code: 74) ................................ 5-44
1.3.25 Print maintenance information (function code: 77) ............................................... 5-49
1.3.26 Check main fan operation (function code: 78) ...................................................... 5-51
1.3.27 Delete fax data (function code: 79) ...................................................................... 5-52
1.3.28 Display machine log information (function code: 80) ............................................ 5-53
1.3.29 Display machine error code (function code: 82) ................................................... 5-57

Brother DCP-L5600DN Specifications

General

Type	all in one
Color	black/gray, multi
Touch Screen	yes
Display Size	3.7 inches
Tray Capacity	50
Output Tray Capacity	150 sheets
Automatic Document Feeder Capacity	70 sheets
Paper Size	ansi a, legal, executive, a4, a5, a6, folio
Paper Handling	letter, legal, executive, a4, a5, a6, envelopes, custom sizes (3.0-8.5" (w), 5.0-14" (l))
Paper Weight	60 grams per square meter
Printing Method	monochromatic
Color Print Speed	0 pages per minute
Mono Print Speed	42 pages per minute
First Page Print Time	7 seconds
Print Resolution Mono	up to 1200 x 1200
Two-Sided Printing	yes
Maximum Number of Pages Per Month	up to 50, 000
Reduction and Enlargement	no
Photo Printing	no
Scanner Type	flatbed
Scan Resolution	up to 1200 x 1200
Duplex Scan	yes
Max Copies	99
Copier Resolution Mono	up to 1200 x 600
Fax Function	no
Cartridges	brother tn820, brother tn850
Number Of Cartridges	1
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0, ethernet
Mobile Devices Connection	no

Weight and Dimensions

Depth	16.8 inches
Height	16.8 inches
Width	19.5 inches
Net Weight	37.7 pounds