Brother GTX pro - Page 284

284
Troubleshooting
(5) Pinch the latch at the front end of ink pouch, and draw out the white ink pouch from the cartridge.
<CAUTION>
 Remove the accumulated ink at the tip of the cartridge with a waste cloth (non-fuzzy cloth). Clean the printer on a regular
basis.
X011
9
(6)
Put the capping pouch in the cartridge.
<TIPS>
 You can use a capping pouch of either the old or new shape.
< New capping pouch>
Push the tip end of capping pouch into the cartridge until it clicks into place.
X0294
< Old capping pouch>
Push the tip end of capping pouch into the cartridge until it clicks into place.
Straighten the capping pouch in such a manner that it will be aligned with the gutter of lid of cartridge, and mount in position by
pulling it with your hand.
<NOTE>
 If the edge of the ink pouch is bent or undulating significantly, make it straight with your hand.
X0049
Old capping pouch
Cartridge
White ink pouch
Cartridge
Cartridge's tip end
Latch
Stretch
New capping pouch
Cartridge