283
Troubleshooting
Replacement procedures for print head on the white side (if you use a capping pouch)
<IMPORTANT>
When you replace a print head on the white side, you can minimize ink consumption by installing a capping pouch (optionally
available) in addition to a print head. Instead of the capping pouch, a white ink pouch at its ink depletion level before its expiry
date can also be used.
(1)
From the menu, select [Maintenance] > [Head Replacement] > [White], and press
.
(2) Make available a capping pouch and select [Yes] in response to the instructions on screen.
<IMPORTANT>
Instead of the capping pouch, a white ink pouch at its ink depletion level before its expiry date can also be used.
<TIPS>
Perform the work operation by following the on-screen instructions.
Pressing
causes the platen to start moving. Do not put anything around the platen.
(3) Remove the white ink cartridge from the printer.
<CAUTION>
The bottom of the cartridge may be soiled with ink. Clean the printer on a regular basis.
W12 W34
X0333
(4) Open the cartridge's lid.
<IMPORTANT>
When opening the lid, be sure not to touch the portion (a). Otherwise, it could be damaged.
Place the entire cartridge on a flat surface, push the latches on the bottom surface of the cartridge downward and open the
lid.
(a)
X0042
White Ink Cartridge
Lid
Cartridge
Latch Lid
To Next Page
Loading...
