Brother GTX pro - Page 313

313
Error message
Error code Error message Description Remedy Reference
1095
[Wiper Cleaner
Replacing Color]
The wiper cleaner on
the color side needs
to be replaced with a
new one.
Replace the wiper cleaner with a
new one.
"7-1-4. Replacing the
wiper cleaner >>P.186"
1096
[Wiper Cleaner
Replacing Color]
The wiper cleaner on
the color side needs
to be replaced with a
new one.
Replace the wiper cleaner with a
new one.
"7-1-4. Replacing the
wiper cleaner >>P.186"
1100
[Pump Tube To Be
Replaced]
Pump tube needs to
be replaced.
Make note of the error code and
error message, and please notify
it to your dealer.
-
1202
[Remove the White
Ink Cartridge and
shake it]
The white ink needs
to be stirred.
Pressing after the stirring
causes the White Ink Refilling
function to be put into execution.
"6-2-3. Daily agitation of
the white ink >>P.118"
1210 [Exhaust Fan Stop]
The exhaust fan is not
working.
Make note of the error code and
error message, and please notify
it to your dealer.
-
1501
[Fan Filter To Be
Replaced]
The fan filter needs to
be replaced with a
new one.
Replace the fan filter with a new
one.
"7-1-7. Replacing the fan
filter >>P.197"
1601
[Flushing Foam
Replacing White]
The flushing foam on
the white side needs
to be replaced with a
new one.
Replace the flushing foam with a
new one.
"7-1-5. Replacing the
flushing foam >>P.189"
1602
[Flushing Foam
Replacing White]
The flushing foam on
the white side needs
to be replaced with a
new one.
Replace the flushing foam with a
new one.
"7-1-5. Replacing the
flushing foam >>P.189"
1605
[Flushing Foam
Replacing Color]
The flushing foam on
the color side needs
to be replaced with a
new one.
Replace the flushing foam with a
new one.
"7-1-5. Replacing the
flushing foam >>P.189"
1606
[Flushing Foam
Replacing Color]
The flushing foam on
the color side needs
to be replaced with a
new one.
Replace the flushing foam with a
new one.
"7-1-5. Replacing the
flushing foam >>P.189"
1700
[Nozzle Guard
Cleaning Timing]
The nozzle guard
needs to be cleaned.
Clean the nozzle guard.
"7-1-3. Cleaning the
nozzle guard, wiper,
exhaust cap, and suction
cap >>P.174"