Brother GTX pro - Page 58

58
Installation and preparation
(17) Click [Finish]. This exits the setting for the PC.
<TIPS>
 If the PC cannot recognize the Printer, a correct static IP address might not be assigned. Consult your administrator.
(18) Adjust the carriage speed. Then adjust the printer using "GTX pro Maintenance".
Menu name Things to prepare See the operating procedure with
GTX pro Maintenance
1 [CR Speed Adjustment] ―
"7-4-1. CR (Carriage) speed
adjustment >>P.216"
2
[Initial settings after head
replacement]
―
"7-4-2. Initial settings after head
replacement >>P.217"
3 [Firing Adjustment]
Black paper or transparent sheet
(such as OHP sheet)
White paper
"7-4-3. Firing adjustment >>P.218"
4
[Platen-Rolling Adjustment]
White paper
"7-4-4. Platen-rolling adjustment
>>P.219"
5 [White/Color Alignment]
Black paper or pretreated black or
dark color T-shirt
"7-4-5. White/color alignment
>>P.220"
6
[Setting of the time displayed
on the nozzle check pattern]
―
"7-4-6. Setting of the time displayed
on the nozzle check pattern >>P.221"