59
Installation and preparation
What to do in the White Ink Pause Mode
For the White ink pause mode, perform the following steps using "GTX pro Maintenance".
Menu name When in White Ink Pause Mode
1 [CR Speed Adjustment] Performed
2 [Initial settings after head replacement]
Performed for color head only
Upon completion of color head
setting, click [Cancel] to close the
maintenance tool once and then start
it. Then proceed to the following
steps.
3 [Firing Adjustment]
Performed for color head only
Upon completion of color head
setting, click [Cancel] to close the
maintenance tool once and then start
it. Then proceed to the following
steps.
4 [Platen-rolling adjustment] Performed
5 [White/Color Alignment] Not required
6 [Setting of the time displayed on the nozzle check pattern] Performed
To Next Page
Loading...
