Brother GTX pro - Page 72

72
Creating print data
(4) Make the following settings in the [Page Size] window:
 [Size]: [Custom]
 [Width]: 14.0 in. (355.6 mm)
 [Height]: 16.0 in. (406.4 mm)
 Page orientation: Portrait
<TIPS>
 Set the width and height to the size of platen to be used. ☞"5-4-1. Select the platen size >>P.91". The above size is the
standard 14X16 platen size.
Create print data (ARXP file)
Save the image data and print settings as a set of print data in ARXP file format.
The following will be made available if the print data is converted into an ARXP file:
 Image data and print settings can be put together and stored.
 Without connection to a PC, the printing can be performed directly from a USB flash memory unit.
<TIPS>
 Image editing is unavailable for any ARXP file. As such, save your image data for an editing purpose in advance.
 For file output, there are some cases where neither file output destination nor extension cannot be specified by the [Print to file]
command. Be sure to use the printer driver "Brother GTX pro FileOutput".
 For details of directly sending data to the Printer from an application☞"6-6-2. Sending print data from applications >>P.155".