Brother GTX pro - Page 73

73
Creating print data
(1) In the menu bar, select [File] > [Print].
(2) Open the [Color] tab, and make the following settings:
 Place a checkmark in the [Document color] checkbox.
 [Color conversions]: "Brother GTX pro" or "Brother GTX pro FileOutput"
 [Color profile]: [sRGB IEC61966-2.1]
 [Rendering intent]: [Relative colorimetric]
(3) On [General] tab, select [Printer] and select "Brother GTX pro FileOutput" for file output.
<TIPS>
 If the specified [Printer] is set to "Brother GTX pro ", the print data will be sent to the printer.
If the specified [Printer] is set to "Brother GTX pro FileOutput", the print data will be saved as an ARXP file.
(4) On [Preferences], create your settings of printer driver.☞ "5-4. Set up the printer driver >>P.89".