Brother GTX pro - Page 86

86
Creating print data
Create print data (ARXP file)
Save the image data and print settings as a set of print data in ARXP file format.
The following will be made available if the print data is converted into an ARXP file:
 Image data and print settings can be put together and stored.
 Without connecting to a PC, the printing can be performed directly from a USB flash memory.
<TIPS>
 Image editing is unavailable for any ARXP file. As such, save your image data for an editing purpose in advance.
 For file output, there are some cases where neither file output destination nor extension cannot be specified by the [Print to file]
command. Be sure to use the printer driver "Brother GTX pro FileOutput".
 For details of directly sending data to the Printer from an application☞"6-6-2. Sending print data from applications >>P.155".
(1) In the menu bar, select [File] > [Print] > [Color Management].
(2) Make the settings as follows:
 [Document Profile]: [sRGB IEC61966-2.1]
 [Color Handling]: [Let Illustrator determine colors]
 [Printer Profile]: [sRGB IEC61966-2.1]
 [Rendering Intent]: [Relative Colorimetric]