Brother GTX pro - Page 87

87
Creating print data
(3) From [Printer], select "Brother GTX pro FileOutput" for file output.
<TIPS>
 If [Printer] is set to "Brother GTX pro ", the print data will be sent to the printer.
If [Printer] is set to "Brother GTX pro FileOutput", the print data will be saved as an ARXP file.
(4) On the [Advanced], make your settings for the printer driver.☞ "5-4. Set up the printer driver >>P.89".
<CAUTION>
 For Adobe Illustrator, set the platen size for the paper size in the Print dialog box in the application. The size or placement of
the image may not be set correctly if you make settings in the Print Settings dialog.
(5) When you press [Print], the dialog box shown below will be displayed on the screen. After that, click [Save].
<TIPS>
 There may be cases where this saving process takes several minutes.
(6) Specify the [Save In] and [File name] first, then click [Save] to save the ARXP file to your PC.