Brother MFC-7240 - Page 57

2-20
Confidential
Machine Error **
Refer to the error code for details.
(** indicates the error code.)
---
Manual Feed
The registration front sensor detected that there
was no paper set in the manual feed slot when
feeding from the manual feed slot was set.
9A 2-43
No Paper There is no paper set in the paper tray. ---
No Toner
The new toner sensor detected that the toner
cartridge was not set.
44 2-28
Out of Memory
There is insufficient memory to expand PC-
print data.
C7 2-53
The memory size allotted for Secure Print was
exceeded when saving Secure Print data.
C8 2-53
Print Unable **
Refer to the error code for details.
(** indicates the error code.)
---
Replace Drum
The drum reached the end of life while the
WSW 78 selector 1 was set to ON.
19 2-24
The number of rotations of the drum unit has
reached the life limit. (Printing does not stop.)
50 2-28
Replace Toner
The number of rotations of the developer roller
reached the upper limit when Stop Mode is set
for the toner cartridge.
63 2-31
The number of rotations of the developer roller
will reach the upper limit soon when Continue
Mode is set for the toner cartridge.
9C 2-44
Scan Unable **
Refer to the error code for details.
(** indicates the error code.)
---
Scanner Error
Error related to the scanner unit. Check the
error code to check the details.
B0
to
BD
2-49
to
2-51
Self-Diagnostic
Rechecking the error after the power switch
was turned OFF and then ON again because
an error was detected by the center thermistor
of the fuser unit.
59 2-30
Size Mismatch
The paper size set on the machine is smaller
than the specified fax size.
7F 2-38
The registration front sensor detected that the
paper set in the paper tray was smaller than
the specified size.
80 2-38
Toner Ended
The number of rotations of the developer roller
reached the upper limit when Continue Mode
is set for the toner cartridge.
9B 2-43
Toner Low
The number of rotations of the developer roller
will reach the upper limit when Stop Mode is
set for the toner cartridge.
67 2-32
Error Message Description
Error
codes
Refer
to: