Brother MFC-9125CN - Page 212

4-10
Confidential
(12) Remove the two Taptite pan B M4x14 screws, and then remove the Fuser unit from the
Main body while holding the “A.”
Fig. 4-11
Fig. 4-12
Note:
- Do not apply a physical impact or vibration to the Fuser unit.
- Do not touch the roller and electrodes as shown in the figure below to prevent
breakage of the Fuser unit.
Taptite pan B M4x14
Taptite pan B M4x14
Fuser unit
Main body
“A”
<Back side>
Pressure roller ASSY
Fuser unit
Fuser unit