App.5-1
Confidential
REFERENCES
This page provides reference information.
It is possible to get the full instructions of the subjects by just clicking on the links below.
1. Machine specification
(Refer to “2. SPECIFICATIONS LIST” in Chapter 1.)
2. Paper specification
(Refer to “2.5 Paper” in Chapter 1.)
3. Error codes
(Refer to “2.1 Error Codes” in Chapter 3.)
4. Error message
(Refer to “2.3 Error Cause and Remedy” in Chapter 3.)
5. Pitch indicated in roller image
(Refer to “4.2 Pitch Indicated in Roller Image” in Chapter 3.)
6. Periodical maintenance parts
(Refer to “3.1 Periodical Maintenance Parts” in Chapter 4.)
7. Reset parts life
(Refer to “2.1 Resetting the Periodical Maintenance Parts Life” in Chapter 7.)
To Next Page
Loading...
