Brother MFC-9125CN - Initialization of EEPROM of Main PCB (Maintenance Mode: Code 01); Setting by Country (Maintenance Mode: Code 74); Setting the Serial Number

6-11
Confidential
1.2 Setting by Country (Maintenance Mode: Code 74)
Make appropriate settings by country in accordance with “1.4.23 Setting by country” in Chapter 7.
1.3 Initialization of EEPROM of Main PCB (Maintenance
Mode: Code 01)
Initialize the EEPROM in accordance with “1.4.1 EEPROM parameter initialization” in Chapter 7.
1.4 Setting the Serial Number
<Procedures>
(1) Connect the PC and machine with the USB cable.
(2) Double-click the brusbsn.exe file which has been copied in the temporary folder to start.
(3) Click the C-Laser 10Model.
(4) In Port on the brusbsn screen, select the port number assigned to the Brother
Maintenance USB Printer. If the port number is unknown, follow steps below.
1) Click Start | Settings | Printers.