Brother MFC-9125CN - TC Arm Spring

5-102
Confidential
8.42 TC Arm Spring
(1) Disconnect the FFC harness:MAIN-LED CTL (CN24) from the Main PCB ASSY.
Fig. 5-107
(2) Release the Hook to remove the LED power relay PCB ASSY from the Side frame L.
Fig. 5-108
Note:
- After disconnecting the flat cable(s), check that each cable is not damaged at its end
or short-circuited.
- When connecting the flat cable(s), do not insert it at an angle. After insertion, check
that the cable is not at an angle.
CN24
CN20
CN27
CN26
CN23
CN22
CN19
CN15
CN10
CN1
CN2
CN3
CN18
CN17
CN16
CN14
CN13
CN11
CN8
CN5
CN6
Main PCB ASSY
Hook
<Left side>
LED power relay PCB
Side frame L
Top cover unit
ASSY