Brother MFC-9125CN - Page 335

5-108
Confidential
1) Slide the Link push arm to the rearmost and insert Pin A of the Top cover arm R to “C”
of the Link push arm.
Fig. 5-118
2) Be sure to mount it by inserting Pin B of the Top cover arm R into “B” of the Arm guide R.
Fig. 5-119
Assembling Note:
When assembling the Arm guide R onto the Top cover arm R, make sure to follow the
procedure described below.
Link push arm
Joint cover sub ASSY
“C“
Link push arm
Pin A
Arm guide R
Top cover arm R
“B“
Joint cover sub ASSY
Top cover arm R
Arm guide R
Arm guide R
Top cover arm R
Pin B