Brother MFC-9125CN - Page 353

5-126
Confidential
* There are the old and new types of the Holder, and each type has a dedicated holder hook.
The new-type Holder hook cannot be assembled into the old-type Holder, and vice versa.
Fig. 5-145-1
Fig. 5-146
Assembling Note:
- When you assemble the Holder hook, make sure to insert the Hook A of the Holder hook
into the “A” of the LED ASSY first, and then assemble the Hook B of the Holder hook to
the Holder.
- After assembling, make sure to check that the Hook A is firmly engaged to the Holder.
If it is not engaged to the Holder firmly, it might cause an image failure.
<Old holder hook> <New holder hook>
<Old holder>
<New holder>
Part code: LU6238001 Color: Black
Part code: LU6535001 Color: Gray
The shape has been changed.
LED ASSY
LED ASSY
Holder
Hook B
“A”
a
c
b
b
* <New holder>
* <Old holder>
Holder
Holder hook
Holder hook
Holder hook
Holder hook
Holder
hook
Hook B
Hook A
Hook B
Hook A
Holder
Holder