Brother MFC-9125CN - Page 374

5-147
Confidential
(9) Remove the three Taptite bind B M4x12 screws and two Taptite cup S M3x6 SR screws,
and then remove the Drum develop drive unit from the Side frame L.
Fig. 5-175
Harness routing: Refer to “ Paper Feed Motor ASSY, Drum Drive Motor.”
(10) Remove the Pendulum gear bush from the Drum develop drive unit.
Fig. 5-176
Taptite bind B M4x12
Taptite cup S M3x6 SR
Side frame L
Pendulum gear bush
Taptite bind B M4x12
Drum develop drive unit
Pendulum gear bush
Drum develop drive unit