Brother MFC-9125CN - Page 412

5-185
Confidential
(8) Remove the two Taptite bind B M4x12 screws and two Taptite cup S M3x6 SR screws,
and then remove the LVPS unit from the Main body.
Fig. 5-239
Fig. 5-240
Assembling Note:
When assembling the LVPS unit onto the Main body, make sure to assemble it in a way that
the LVPS plate is placed at a lower position than the Middle plate.
Taptite bind B M4x12
Main body
LVPS unit
Middle plate
Taptite cup S M3x6 SR
<Back side>
LVPS unit
LVPS plate
Middle plate
LVPS plate
LVPS unit
Middle plate