Brother MFC-9125CN - Page 414

5-187
Confidential
(11) Remove the Taptite pan (washer) B M4x12DA screw, and then remove the Low-voltage
power supply PCB ASSY from the LVPS cover.
Fig. 5-243
(12) Disconnect the three Connectors (CN101, CN102, CN103) from the Low-voltage power
supply PCB ASSY.
Fig. 5-243-1
Harness routing: Refer to “ Low-voltage Power Supply PCB ASSY.”
LVPS cover
Low-voltage power supply PCB ASSY
Taptite pan (washer)
B M4x12DA
Low-voltage power supply PCB ASSY
CN101
CN102
CN103