Brother MFC-9125CN - Page 563

App.1-30
Confidential
■ WSW31 (Function setting 9)
- Selector 2: Default reduction rate for failure of automatic reduction during recording
This selector sets the default reduction rate to be applied if the automatic reduction function fails to
record one-page data sent from the calling station in a single page of the current recording paper.
If it is set to “0,” (ON) the machine records one-page data at full size (100%) without reduction; if it is
set to “1,” (OFF) the machine records it at 70% size.
■ WSW32 (Function setting 10)
- Selectors 5 and 6: Default resolution
These selectors set the default resolution which applies when the machine is turned on or
completes a transaction.
- Selectors 7 and 8: Default contrast
These selectors set the default contrast which applies when the machine is turned on or completes
a transaction.
Selector No. Function Setting and Specifications
1 Not used.
2
Default reduction rate for failure of
automatic reduction during recording
0: ON
1: OFF
3 Not used.
4 Do not disturb this selector.
5
Minimum ON and OFF duration of
ringer signals effective in distinctive
ringing (Not used.)
6
l
7
Not used.
8 Drum life indication
0: No
1: Yes
Note:
Selector 5 is applicable only to the USA models.
Selector No. Function Setting and Specifications
1
l
4
Not used.
5
6
Default resolution when FAX scanning
No. 5 6
0 0: Standard
0 1: Fine
1 0: Super fine
1 1: Photo
7
8
Default contrast when FAX scanning
No. 7 8
0 0: Automatic
0 1: Automatic
1 0: Super light
1 1: Super dark