Brother MFC-9125CN - Page 582

App.1-49
Confidential
■ WSW61 (Scanning light intensity to judge to be stable 1)
■ WSW62 (Scanning light intensity to judge to be stable 2)
- Selectors 5 through 8: Selection of judging function for scanning pages compensation
These selectors set the condition to control scanning pages compensation. Some operation losses
occur in the control of the compensation. If you want to start scanning immediately even if the
image quality is not good, set to “01: Not discriminates”. If you want to give priority to the image
quality even though losses are increased, select one of others (“00: Discriminates depending on the
rate of change” or “10: Discriminates every page”).
Selector No. Function Setting and Specifications
1
l
4
Change rate of the CCD scanning
light intensity to judge to be stable in
the long time mode (Not used.)
5
l
8
Change rate of the CCD scanning
light intensity to judge to be stable in
the short time mode (Not used.)
Selector No. Function Setting and Specifications
1
l
4
Change rate of the CCD light
intensity for scanning pages
compensation (Not used.)
5
6
Selection of judging function for
simple scanning pages
compensation
No. 5 6
0 0: Judges according to the
change rate
0 1: Not judges
1 0: Judges every page
7
8
Selection of judging function for
regular scanning pages
compensation
No. 7 8
0 0: Judges according to the
change rate
0 1: Not judges
1 0: Judges every page