2-21
Confidential
9804 Error occurred with the value
measured during density sensor
sensitivity calibration.
2-67
9901 Error occurred with the value
measured during adjustment of
color registration.
2-68
9902 Dot counter or develop roller
counter of color toner has
reached the upper limit during
adjustment of color registration.
2-68
9903 Error occurred during patch data
printing in adjustment of color
registration.
2-69
9A01 Error occurred with the value
measured during auto color
registration performed from the
control panel.
2-70
9A02 Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration
performed from the control
panel.
2-70
9A03 Error occurred during patch data
printing in auto color registration
performed from the control panel.
2-71
9A04 ---
9C01 ---
9C02 ---
9C03 ---
9C06 ---
9C07 ---
A000 Upon scanning the second side
in duplex scanning, scanned
data cannot be output with the
required number of pixels and
image processing is not
completed successfully.
2-71
Error
codes
Problem
Refer
to:
A200 During document scanning, the
first side document scanning
position sensor detected that the
document length was 90 cm or
more.
2-72
A300 Though a document was fed and
conveyed by the specified
distance or longer, the first side
document scanning position
sensor did not detect the passing
of the paper.
2-72
A400 The ADF cover sensor detected
that the ADF cover was opened.
2-72
A500 Upon scanning a fax, the first
side CIS white or black
calibration data was not within
the normal range.
2-73
A600 Though a fax was scanned again
after A500 error, the first side
CIS white or black calibration
data was not within the normal
range.
2-73
A700 The ROM color parameter does
not match the first side CIS or
second side CIS.
2-73
A800
When an image was scanned
and processed, an error was
detected in ROM color parameter.
2-73
A900 When an image was scanned
and processed, a scanning error
occurred.
2-73
AA00 ---
AB00 ---
AC00
Upon scanning a fax, the second
side white or black calibration
data was not within the normal
range.
2-73
Error
codes
Problem
Refer
to:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
