Brother MFC-J3520 Service Manual

5-50
Confidential
1.3.28 Move of the Head/Carriage Unit to the Center (Maintenance mode 75)
< Function >
This function is used to remove paper particles and dust accumulated between the
maintenance unit and head/carriage unit. Using this function moves the head/carriage
unit to the center of its travel, allowing you to easily remove the paper particles and
dust accumulated.
< Operating Procedure >
(1) Press the 7 and 5 keys in this order in the initial stage of the maintenance mode.
The "PLS OPEN COVER" appears on the LCD.
The head/carriage unit moves to the center of its travel.
(2) Open the scanner cover.
The "PLS CLOSE COVER" appears on the LCD.
(3) Remove the paper particles and dust accumulated.
(4) Close the scanner cover.
The head/carriage unit moves back to the home position and the machine returns
to the initial stage of the maintenance mode.
TIP: Holding down the X key with the document scanner unit opened for at least five
seconds can also move the head/carriage unit in the same manner as above.

Brother MFC-J3520 Specifications

General

Print Technology	Inkjet
Duplex Printing	Yes
Fax Modem Speed	33.6 kbps
Functions	Print, Copy, Scan, Fax
Standard Paper Capacity	250 sheets
Mobile Printing	Yes
Max Print Resolution	6000 x 1200 dpi
Scanner Type	Flatbed + ADF
Max Scan Resolution	1200 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi
Automatic Document Feeder (ADF)	Yes
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Speed (Black)	Up to 35 ppm (draft), 12 ppm (ISO)
Print Speed (Color)	27 ppm
Display	2.7" Touchscreen Color LCD