Brother MFC-J460DW - Page 301

Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Add or Delete
Group Members
Add or Delete Group Members
>> MFC-J460DW/MFC-J480DW/MFC-J485DW
>> MFC-J680DW/MFC-J880DW/MFC-J885DW
MFC-J460DW/MFC-J480DW/MFC-J485DW
1. Press (Address Book).
2. Press a or b to select [Setup Groups], and then press OK.
3. Press a or b to select the Group you want to change, and then press OK.
4. Press a or b to select the option to add or delete Group members in the following ways:
• To add a number to the Group, do the following steps:
a. Select [Add Number]. Press OK.
b. Select [Alphabetical Order] or [Numerical Order]. Press OK.
c. Select a number from the list. Press OK.
• To delete a number from the Group, do the following steps:
a. Select a number to delete. Press OK.
b. Press 1 to confirm.
5. Press a or b to select [Complete] and then press OK.
6. Press Stop/Exit.
MFC-J680DW/MFC-J880DW/MFC-J885DW
1. Press
[Fax] > [Address Book] > [Edit] > [Change].
2. Press a or b to display the Group you want to change, and then press it.
3. Press a or b to display [Add/Delete], and then press it.
4. Press a or b to display the number you want to add or delete.
5. Do the following for each number you want to change:
• To add a number to the Group, press the check box of the number to add a check mark.
• To delete a number from the Group, press the check box of the number to remove the check mark.
6. Press [OK].
7. Press [OK].
8. Press
.
Related Information
• Set up Groups for Broadcasting
295