Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the
Mode Timer
Set the Mode Timer
Related Models: MFC-J460DW/MFC-J480DW/MFC-J485DW
You can change the amount of time after the last Fax, Scan, Copy or Web operation before the machine returns
to Ready Mode. If you choose [Off], the machine stays in the mode you used last.
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Mode Timer]. Press OK.
c. Select [Off], [0Sec], [30Secs], [1Min], [2Mins], or [5Mins]. Press OK.
3. Press Stop/Exit.
Related Information
• General Settings
550
To Next Page
Loading...
