MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
SERVICE MANUAL
4-67
3.23 Base Plate / LV Insulation Sheet
(1) Remove the eight bind B M4x12 Taptite screws.
(2) Remove the four cup S M3x6 Taptite screws.
(3) Remove the pan (washer) M3.5x6 Taptite screw, and then remove the ground wire.
(4) Remove the base plate.
Fig. 4-118
(5) Remove the two bind B M4x12 Taptite screws, and then remove the LV insulation sheet
1, 2, 3.
Fig. 4-119
Taptite, cup S M3x6
Taptite, bind B M4x12
Taptite, bind B M4x12
Taptite, bind B M4x12
Taptite, cup S M3x6
Base plate
Screw, pan
(washer) M3.5x6
Ground wire
LV insulation sheet 2
Taptite, bind B M4x12
LV insulation sheet 1
LV insulation sheet 3
To Next Page
Loading...
