Brother mfc8440 - NCU (MFC-8440;8840 D;8840 DN Only)

MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
SERVICE MANUAL
4-53
3.19 NCU (MFC-8440/8840D/8840DN only)
(1) Disconnect the connector.
(2) Remove the two cup S M3x6 Taptite screws, and then remove the NCU unit.
Fig. 4-93
(3) Remove the cup S M3x6 Taptite screw, and then remove the NCU shield cover.
(4) Remove the two cup S M3x6 Taptite screws, and then disconnect the connector.
(5) Remove the NCU.
Fig. 4-94
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
NCU harness
NCU shield cover
NCU shield plate
Hook
Hook
NCU harness
NCU
NCU unit