Brother mfc8440 - DX-Sensor PCB ASSY (MFC-8840 D;8840 DN, DCP-8045 D;8045 DN Only)

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-68
3.24 DX-Sensor PCB ASSY (MFC-8840D/8840DN, DCP-8045D/8045DN only)
(1) Disconnect the connector.
(2) Remove the bind B M3x10 Taptite screws, and then remove the DX-sensor PCB ASSY.
Fig. 4-120
Taptite, bind B M3x10
DX-sensor PCB ASSY
Engine PCB ASSY