Brother mfc8440 - Unpacking

CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-2
2. UNPACKING
When unpacking the machine, check to see that all of the following components are included
in the carton.
Quick Setup Guide
CD-ROMs
For Windows (1 piece)
®
For Macintosh (1 piece)
®
User's Guide
ADF Support
Drum Unit Assembly
AC Power Cord
Telephone
Line Cord
Test Sheet
(U.S.A. only)
(U.S.A./Canada only)
(including Toner Cartridge)
Accessory Order Form
4
3
1
1. Control Panel
2. Face-down Output Tray
Support Flap (Support Flap)
3. Manual Feed Tray
(For MFC-8440, DCP-8040)
Multi-purpose Tray (MP Tray)
(For MFC-8840D/8840DN, DCP-8045D/8045DN)
4. Paper Tray
5. Front Cover
6. Power Switch
7. Document Cover
8. Automatic Document Feeder (ADF)
2
MFC
5
6
7
8
Fig. 2-1
Carton components may differ from one country to another.
Save all packing materials and the carton.
NOTE:
• The interface cable is not a standard accessory. Please purchase the appropriate
interface cable for the interface you intend to use (Parallel or USB).
• For Parallel use a bi-directional shield interface cable that is IEEE 1284-compliant, and not
longer than 6 feet (2 meters).
• For USB: use a Hi-Speed USB 2.0 interface cable that is not longer than 6 feet (2 meters).
• Please make sure that you use a Hi-Speed USB 2.0 certified cable if your computer uses
a Hi-Speed USB 2.0 interface.
• Even if your computer has a USB 1.1 interface, you can connect the machine.