Brother mfc8440 - Panel Unit

MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
SERVICE MANUAL
4-33
3.9 Panel Unit
(1) Remove the four cup B M4x12 Taptite screws, and then remove the connector and panel
unit.
Fig. 4-56
(2) Remove the six cup B M3x8 Taptite screws, and then remove the panel rear cover.
Fig. 4-57
Panel unit
Taptite, cup B M3x8
Taptite, cup B M3x8
Panel rear cover
Panel cover
Taptite, cup B M4x12
Taptite, cup B M4x12
Panel PCB harness
1
2
Hook
Hooks