Brother mfc8440 - Page 114

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-32
(18) Remove the two pan (S/P washer) M3x6 screws, and then remove the scanning motor
FB.
Fig. 4-54
(19) Remove the B M3x6 Taptite screw, and then remove the pulley ASSY and pulley spring.
Fig. 4-55
Pulley spring
Taptite, B M3x6
Pulley ASSY
Scanner base
Drive plate ASSY
Scanning motor FB
Pan (S/P washer) M3x6