To Next PageTo Next PageWhat to do if Brother P-touch PT-D600 says 'Text Too Long!'?
If your Brother Label Maker displays 'Text Too Long!', it means the label's length, based on the text you've entered, exceeds the current length setting. To resolve this, either edit the text to fit within the set length, or change the length setting itself.
What to do if Brother Label Maker says 'Label Too Long!'?
If your Brother Label Maker displays 'Label Too Long!', it means the label's length, based on the text you've entered, exceeds 1 meter. To fix this, edit the text to shorten the label so that it is less than 1 m.
What to do if the ink ribbon is separated from the ink roller in my Brother P-touch PT-D600 Label Maker?
If the ink ribbon is separated from the ink roller in your Brother Label Maker, replace the tape cassette if the ink ribbon is broken. If the ribbon is not broken, leave the tape uncut, remove the tape cassette, and wind the loose ink ribbon onto the spool.
Why is the display blank on my Brother Label Maker?
If the display of your Brother Label Maker remains blank after turning it on, check that the batteries are correctly installed and that the AC adapter, designed exclusively for your P-touch labeler, is properly connected. Also, ensure that the rechargeable battery is fully charged.
How to unlock a Brother Label Maker?
If the screen of your Brother P-touch Label Maker 'locks' or becomes unresponsive, reset the internal memory to its initial settings. If this doesn't resolve the issue, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if my Brother P-touch PT-D600 Label Maker is not cutting automatically?
If the Brother Label Maker isn't cutting labels automatically, verify that the 'Cut Option' isn't set to 'Chain' or 'No Cut,' as this prevents tape feeding after printing. Alternatively, you can manually feed and cut the tape using the designated buttons.
Why is my Brother Printer label not printing correctly?
Remove the tape cassette and firmly reinstall it until it clicks into place. If the print head is dirty, clean it using a cotton swab or an optional print head cleaning cassette (TZe-CL4).
What to do if Brother Label Maker display remains blank?
If the display on your Brother Label Maker remains blank after turning it on, check that the batteries are correctly installed and the AC adapter (designed for your P-touch) is properly connected. Also, ensure the rechargeable battery is fully charged.
How to fix Brother P-touch PT-D600 if the label is not cut automatically?
If your Brother Label Maker isn't cutting labels automatically, check the Cut Option setting. If it's set to 'Chain' or 'No Cut', the tape won't feed after printing. To manually feed and cut the tape, press the corresponding feed and cut buttons.
Why does my Brother P-touch PT-D600 Label Maker stop while printing a label?
If your Brother Label Maker stops during printing, it might be due to the tape running out. Check if striped tape is visible, which indicates the end of the tape. In this case, replace the tape cassette. Also, ensure sufficient power by replacing the batteries or connecting the AC adapter.
General| Print Resolution | 180 dpi |
|---|---|
| Max Tape Width | 24 mm |
| Keyboard Type | QWERTY |
| Connectivity | USB |
| Model | PT-D600 |
| Category | Label Maker |
| Tape Sizes | 3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm |
| Cutter | Automatic |
| Print Method | Thermal transfer |
| Memory | Up to 99 labels |
| Display | LCD |
| Power Source | AC adapter or 6 AA batteries |
| Tape Type | TZe |
| Print Speed | 30 mm/sec |
| Label Width | Up to 24 mm |
| Weight | 1.3 kg (without batteries) |
Statement regarding the product's compliance with ENERGY STAR guidelines for energy efficiency.
Essential safety guidelines to prevent injury, damage, and hazards like fire or electric shock.
Important usage guidelines and environmental considerations for optimal performance and longevity.
Unpacking the P-touch, identifying carton contents, and understanding the LCD and keyboard layout.
Instructions on connecting the AC adapter or installing batteries, and inserting a tape cassette.
Turning the device on/off, feeding tape, and setting input/preview modes.
Steps for creating labels directly or via PC connection, including input modes.
Methods for inputting, editing, switching case, and using various input methods for text entry.
Setting character styles, size, width, alignment, and using frames and symbols.
Adjusting label length, margins, and applying pre-defined templates for specific purposes.
Previewing, printing options, auto-numbering, mirror printing, and tape cutting settings.
Guidelines and procedures for creating barcode labels, including parameter settings.
Printing labels stored in the device's collection and downloading new categories.
Setting the device's internal clock and date for time-sensitive labels.
Choosing to print current, fixed, or adjusted time/date on the label.
Saving created labels to memory and retrieving them for printing or editing.
Procedures for deleting saved labels and applying management markings (colors).
Methods for resetting internal memory, including factory defaults and specific data clearing.
Instructions for cleaning the unit, print head, and tape cutter for optimal performance.
Solutions for common issues like unresponsive screen, blank display, or printing errors.
Interpreting and resolving specific error messages displayed on the P-touch screen.
Technical details of the P-touch PT-D600, including dimensions, power, and tape compatibility.
Software and hardware requirements for using the P-touch with a computer.
