To Next PageTo Next PageHow to reset a Brother P-touch Label Maker when it locks up?
If your Brother P-touch Label Maker screen 'locks' or becomes unresponsive, reset the internal memory to its initial settings. If resetting doesn't solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if my Brother P-touch PT-D600 Label Maker is not printing after pressing the Print key?
If the Brother Label Maker does not print after pressing the Print key, make sure that you have entered text and that the tape cassette is correctly installed with sufficient tape. If the tape is bent, cut off the bent section and thread it through the tape exit slot. If the tape is jammed, remove the tape cassette, pull out the jammed tape, and cut it. Ensure the end of the tape passes through the tape guide before reinstalling the cassette.
What to do if Brother Printer label does not print?
First, ensure that you've entered text for printing. Also, verify that the tape cassette is correctly installed and contains sufficient tape. If the tape is creased, cut off the affected section and thread the tape through the exit slot. If the tape is jammed, remove the cassette, carefully remove the jammed tape, cut it, and ensure the tape end goes through the guide before reinstalling the cassette.
Why does my Brother P-touch PT-D600 Label Maker not print labels correctly?
If labels from your Brother Label Maker aren't printing correctly, remove the tape cassette and firmly reinstall it until it clicks. Also, a dirty print head can cause issues; clean it using a cotton swab or a print head cleaning cassette (TZe-CL4).
What to do if Brother Label Maker does not print after pressing the Print key?
If your Brother Label Maker isn't printing after you press the Print key, make sure you've entered text and that the tape cassette is correctly installed with enough tape. If the tape is creased, cut off the damaged part and thread the tape through the exit slot. For jammed tape, remove the cassette, pull out the jammed portion, and cut it. Ensure the tape end goes through the guide before reinstalling.
Why does my Brother Label Maker display remain blank after turning it on?
If the display on your Brother Label Maker remains blank after you turn it on, check that the batteries are correctly installed and that the AC adapter, designed exclusively for your P-touch labeler, is properly connected. Also, ensure that the rechargeable battery is fully charged.
What to do if Brother Label Maker is not printing after pressing the Print key?
If your Brother Label Maker isn't printing when you press the Print key, first check that you've entered text. Then, make sure the tape cassette is correctly installed and has enough tape remaining. If the tape is bent, cut off the bent section and thread it through the tape exit slot. If the tape is jammed, remove the tape cassette, pull out the jammed tape, and cut it. Ensure the end of the tape passes through the tape guide before reinstalling the cassette.
Why is my Brother Label Maker not cutting automatically?
If your Brother Label Maker isn't cutting automatically, it might be because the Cut Option setting is set to Chain or No Cut, which prevents the tape from feeding after printing. To address this, check the Cut Option setting. Alternatively, you can manually feed and cut the tape by pressing the feed and cut buttons.
What to do if Brother Label Maker is not printing correctly?
If your Brother Label Maker is not printing correctly, try removing the tape cassette and then reinstalling it, pressing firmly until you hear it click into place. If the print head appears dirty, clean it using a cotton swab or an optional print head cleaning cassette (TZe-CL4).
Why is my Brother Label Maker not printing correctly?
If your Brother Label Maker is not printing correctly, try removing and reinstalling the tape cassette, ensuring it clicks firmly into place. Also, if the print head is dirty, clean it using a cotton swab or the optional print head cleaning cassette (TZe-CL4).
General| Print Resolution | 180 dpi |
|---|---|
| Max Tape Width | 24 mm |
| Keyboard Type | QWERTY |
| Connectivity | USB |
| Model | PT-D600 |
| Category | Label Maker |
| Tape Sizes | 3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm |
| Cutter | Automatic |
| Print Method | Thermal transfer |
| Memory | Up to 99 labels |
| Display | LCD |
| Power Source | AC adapter or 6 AA batteries |
| Tape Type | TZe |
| Print Speed | 30 mm/sec |
| Label Width | Up to 24 mm |
| Weight | 1.3 kg (without batteries) |
Statement regarding the product's compliance with ENERGY STAR guidelines for energy efficiency.
Essential safety guidelines to prevent injury, damage, and hazards like fire or electric shock.
Important usage guidelines and environmental considerations for optimal performance and longevity.
Unpacking the P-touch, identifying carton contents, and understanding the LCD and keyboard layout.
Instructions on connecting the AC adapter or installing batteries, and inserting a tape cassette.
Turning the device on/off, feeding tape, and setting input/preview modes.
Steps for creating labels directly or via PC connection, including input modes.
Methods for inputting, editing, switching case, and using various input methods for text entry.
Setting character styles, size, width, alignment, and using frames and symbols.
Adjusting label length, margins, and applying pre-defined templates for specific purposes.
Previewing, printing options, auto-numbering, mirror printing, and tape cutting settings.
Guidelines and procedures for creating barcode labels, including parameter settings.
Printing labels stored in the device's collection and downloading new categories.
Setting the device's internal clock and date for time-sensitive labels.
Choosing to print current, fixed, or adjusted time/date on the label.
Saving created labels to memory and retrieving them for printing or editing.
Procedures for deleting saved labels and applying management markings (colors).
Methods for resetting internal memory, including factory defaults and specific data clearing.
Instructions for cleaning the unit, print head, and tape cutter for optimal performance.
Solutions for common issues like unresponsive screen, blank display, or printing errors.
Interpreting and resolving specific error messages displayed on the P-touch screen.
Technical details of the P-touch PT-D600, including dimensions, power, and tape compatibility.
Software and hardware requirements for using the P-touch with a computer.
