BRP ROTAX 912 Series - Page 67

BRP-Rotax
MAINTENANCE MANUAL LINE
ATTENTION
When removing the propeller gearbox, take care not to damage the bearing point
and the oil seal running surface (on the roller bearing side) of the propeller shaft.
Figure 5.1: typical
1 Allen screw M8 2 Allen screw M6
Figure 5.2
1
Puller part no. 877660
2 Handle
3 Gear cover
Effectivity: 912 Series
Rev. 0
05–50–00
Page 3
January 01 2020