PULSE Multi-analyzer System Type 3560-B/C/D/E – Installation and IDAe Hardware88
• Alarm Off – 0V
• Alarm On – 5V,
• Pin # 9 – Ground
• Pin # 10 – DC (out) 1; 100 kΩ pull-up to 5 V
• Pin # 20 – DC (out) 2; 100 kΩ pull-up to 5 V
If Cable AO-1472 is connected to Aux. I/O, then the 37-pin plug has:
• Pin # 28 – Ground
• Pin # 9 – DC (out) 1
• Pin # 27 – DC (out) 2
Cable AO-1472
This is a 37-pin D-sub to Aux I/O cable.
Aux I/O Pin Number Colour D-Sub Pin Number
1White37
2Brown35
3 Green 33
4Yellow31
5Grey18
6Pink16
7Blue14
8 Red 12
9Black28
10 Violet 9
11 Grey/Pink 36
12 Blue/Red 34
13 White/Green 32
14 Brown/Green 30
15 White/Yellow 17
16 Yellow/Brown 15
17 White/Grey 13
18 Grey/Brown 11
19 White/Pink 1
20 Pink/Brown 27
Housing Screen Housing
To Next Page
Loading...
