NOTICE!
Risk of property damage from improper filling!
Incorrect filling of the water tank can cause malfunc-
tions of the water level indicator or defects to the
device. In addition, water may leak from the device
and result in property damage.
– Only fill the water tank with normal tap water or
treated water with at least 300 µS (max. 30 °C, 86
°F). Never fill with distilled water.
– Fill the water tank on a fluid-resistant surface.
– Do not use aromatic substances.
– Ensure that the water does not spill and does not
enter the device.
– Every 3–4 weeks, completely drain the water tank
and refill it again.
It is not necessary to fill devices with an automatic
water supply
Ä
Chapter 8.2 “Automatic water supply”
on page 60.
Personnel:
n
Operator
1. Connect the power plug of the humidifier to the power supply
and switch on the humidifier.
2. Open the fill flap (Fig. 22/1).
3. Using a watering can, carefully fill the water tank (up to 50
liters / 13.2 gallons).
4. Close the fill flap again.
ð
The [Water level indicator] shows the current fill level
(max. 5 bars).
Fig. 22: Opening the fill flap
Operating the humidifier
Evaporation Humidifier B500 Professional 33
To Next Page
Loading...
