and start-up
4 General
4.1 Content and scope of this manual
This documentation provides the reader with an overview of all required operating steps for the installation and
operation of the device and the safety measures necessary for these purposes.
Furthermore, it contains technical data, application information and a basic description of the device and its specific
components.
The operational and safety instructions given are to be adhered to in order to ensure ongoing optimum functioning
of the device and to meet the warranty requirements of BRUSA Elektronik AG.
4.2 Scope of the entire documentation
To commission the device successfully, the entire set of documentation as well as diverse pieces of
software are required. The provision of the customer package ensures that the docume
software are complete and up-to-
date. Specific documents are updated automatically and can be
seen in the history.
The customer package includes the following indexes:
Manuals:
Contains all information fundamentally necessary for installation and operation.
Firmware / CAN:
Contains all necessary CAN data as well as current firmware.
PC software:
Contains additional tools for the operation, parameter setting and maintenance as well as the required driver files.
CAD data:
Contains various CAD data in 2D and 3D.
Measurements / tests:
Contains different test results of validating measurements as well as qualifying tests, if applicable.
History:
List of all updates within the customer package, indicating the affected documents or software/firmware etc.
To Next Page
Loading...
