Drive Wheel
PS S3.1 3500
F-code Section C-code
Version no T-code
001 OE35
© BT Products
99
Service Manual 1997-10-21
Drive Wheel
5.1. Removal
The drive wheel can be removed without removing the
transmission by following these steps.
1. Park truck on level surface, and block truck from
moving.
2. Disconnect the battery.
3. Hoist machine and securely block truck with drive
tire about 1 in. off floor.
4. Remove lug bolts and remove tire and wheel
assembly.
5. Press drive tire (2) from wheel hub (3).
Lug Bolts
1
2
3
To Next Page
Loading...
