BT OE35 - Status Codes

Dash Display
PS S5.3 5230
F-code Section C-code
Version no T-code
001 OE35
© BT Products
159
Service Manual 1997-12-15
4. Status Codes
The following status codes are items that operator should
check.
Status Code -01
Indicates that brake foot switch is not closed. Make
sure the brake foot pedal is depressed.
Status Code -02
Indicates forward switch was closed before the key
switch or start switch or brake switch was closed.
With key switch on and start switch is pressed;
return directional switch to neutral then select
direction.
Status Code -03
Indicates rearward switch was closed before the
key switch or start switch or brake switch was
closed. With key switch on and start switch is
pressed; return directional switch to neutral then
select direction.
Status Code -04
Indicates forward or rearward switch was closed
before the key switch or start switch or brake
switch was closed. Status code will change to -03 if
rearward directional switch or -02 if forward
directional switch is closed.
Status Code -05
Indicates brake foot switch is not closed. Make
sure brake foot switch is closed.
Return