PS S5.3 5230
001 OE35
Version no T-code
F-code Section C-code
Dash Display
158
Service Manual 1997-12-15
2. Location
The dash display is physically located on the cross member
on the mast upright. The display is viewed through windshield
when platform is in the fully lowered position.
3. Operational Checks
3.1. Checking Hourmeter
1. Turn on the key switch.
2. Push start switch button and hold in.
3. The display is hourmeter LED reading.
3.2. Checking Battery Condition (BDI).
4. Turn on the key switch.
5. Push start switch button and do not hold in.
6. Depress foot brake pedal and hold down.
7. The display is percent of battery discharge.
8. The battery condition is displayed anytime unit is in
the operating mode.
3.3. Checking Status Code (wrench).
9. Turn on the Key switch.
10.Push start switch button and do not hold in.
11.The display is a status code for failure with unit.
To Next Page
Loading...
