Micro 70 Wire Guidance
PS S8.0 8200
F-code Section C-code
Version no T-code
001 OE35
© BT Products
299
Service Manual 1997-10-24
5. Cautions and Warnings
When operating a truck equipped with the N.D.C Micro 70
guidance system, it is essential to read and understand the
following cautions and warnings. They are critical to the safe
operation of the truck.
The Micro 70 system is designed to steer
the truck without the operator controlling
the steering mechanism. Steering
components may move suddenly and
without warning. Extra caution should be
taken when working on or around the
steering components of this vehicle to
insure the safety of the technician and
other persons nearby.
WARNING
Perform a daily operational check of the
vehicle. Do not operate a malfunctions
vehicle. Report all malfunctions to your
supervisor or foreman. Operation of a
malfunctioning vehicle could result in
person injury or property damage.
WARNING
When charging the truck battery, make
sure that the charger is connected to
the battery and not the truck. Failure to
do so will result in damage to the N.D.C
Micro 70 components and/or other
vehicle components.
CAUTION
Do not use the manual mode of operation
within the guided aisle. Use of the manual
mode within the guided aisle could result
in personal injury or property damage.
WARNING
Stay clear of raised platforms or forks and
rotating or moving parts. Failure to do so
could result in personal injury or property
damage.
WARNING
To Next Page
Loading...
