Lift Cylinder, 2 Stage
PS S7.3 7310
F-code Section C-code
Version no T-code
000 OE35
© BT Products
281
Service Manual 1997-12-15
Lift Cylinder, 2 Stage
The lift cylinders are the positive displacement type, meaning
there are
NO
seals on the lower end of the cylinder rod. The
lift cylinder can be resealed without removing from the truck.
POS.
NO
DESCRIPTION
POS.
NO
DESCRIPTION
POS.
NO
DESCRIPTION
1
Tube, cylinder
6 Piston 11 Bearing
2 Retainer 7K Ring, wear 12K Ring, wear
3Pin 8
Rod, cylinder
13K Seal
4 Spring 9K O ring 14K Wiper
5 Ball 10K Ring, backup K
Kit, seal
Torque to
250/300 ft./lbs.
NOTE! CLEANLINESS!
Perform procedures in a
clean environment. Make sure all parts are
cleaned before disassembly and kept clean
during assembly.
To Next Page
Loading...
