Electrical System Troubleshooting Charts
PS S5.4 5460
F-code Section C-code
Version no T-code
001 OE35
209
Service Manual 1996-10-15
© BT Products
0 volts - adjust or replace foot pedal switch.
3. Positive side of platform gate switch wire #35.
0 volts - repair open wiring from foot pedal
switch to gate switch.
4. Negative side of gate switch.
0 volts - adjust or replace gate switch.
5. Positive side of second gate switch, wire #20.
0 volts - repair open wiring from first gate
switch to second gate switch.
6. Negative side of second gate switch.
0 volts - adjust or replace second gate switch.
7. Positive side of lift switch.
0 volts - repair open wiring from second gate
switch to lift switch.
8. Negative side of lift switch.
0 volts - replace lift switch.
9. Positive of lift pump contactor coil.
0 volts - repair open wiring from lift switch to
contactor coil.
10.Negative side of contactor coil.
0 volts - check contactor for mechanical
binding, replace contactor coil.
Battery volts - repair open wiring to battery
negative.
1.4.2 No high speed lift, low speed lift okay.
Condition for test: Battery plugged in, key switch in
“on” position, start button pushed and released,
emergency disconnect contactor closed, foot pedal
To Next Page
Loading...
